High Speed Paper Sheeting Machine 1700mm

Let’s be honest: if you’re running 10‑15 different sheet sizes every day, you know the pain. Each changeover on an old guillotine or manual sheeter eats 20‑30 minutes – sometimes more. By the end of the week, you’ve lost a full shift’s worth of production.If you run frequent changeovers on 1700mm rolls, the High Speed Paper Sheeting Machine 1700mm will save you hours every shift.

Send Inquiry

Need a 1700mm sheeter that actually handles daily changeovers?

Let's be honest: if you're running 10‑15 different sheet sizes every day, you know the pain. Each changeover on an old guillotine or manual sheeter eats 20‑30 minutes – sometimes more. By the end of the week, you've lost a full shift's worth of production.If you run frequent changeovers on 1700mm rolls, the High Speed Paper Sheeting Machine 1700mm will save you hours every shift.

The HH-1700 cuts that to about 2 minutes per changeover. How? Recipe storage and servo‑driven length adjustment. The 7‑inch touchscreen stores up to 100 jobs. When you need to switch from, say, 500x700mm to 420x297mm, you just recall the job. The servo repositions the cut length automatically. No rulers, no crank wheels.

product-1200-485

What you get:

Single rotary knife

– Cr12MoV steel. Blades can be re-sharpened every 2-3 years; a set lasts 5-6 years.

±0.3 mm accuracy with closed

– Loop tension. Drift under 0.5 mm even at roll end.

300 m/min top speed

– At 500mm cut length, about 10 sheets per second.

Paper range 50‑500 gsm

– Coated, kraft, whiteboard. Avoid double gray board.

Case in point – Jakarta stationery exporter:

They produce 3 million notebooks a month using 70gsm writing paper. Before, they had 20 daily changeovers at 30 minutes each – 10 hours lost. Paper dust from cutting caused 12% returns (glue couldn't hold). After switching to the HH-1700 with anti‑static and vacuum dust collection, changeover dropped to 2 minutes, and returns fell to 0.3%. The machine now runs one shift instead of two.